03-16-2010 12:21 PM - edited 02-21-2020 04:33 PM
I am working on on VPN ISSUE:
I did a crypto isakmp and ipsec to troubleshoot, i got this:
Mar 16 00:46:05 PDT: IPSEC(sa_request): ,
(key eng. msg.) OUTBOUND local= 210.183.54.250, remote= 53.236.33.80,
local_proxy= 122.216.224.0/255.255.254.0/0/0 (type=4),
remote_proxy= 53.236.33.96/255.255.255.224/0/0 (type=4),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 3600s and 4608000kb,
spi= 0xE2ECF6A1(3807180449), conn_id= 0, keysize= 0, flags= 0x400A
Mar 16 00:46:05 PDT: ISAKMP: local port 500, remote port 500
Mar 16 00:46:05 PDT: ISAKMP: set new node 0 to QM_IDLE
Mar 16 00:46:05 PDT: ISAKMP: Find a dup sa in the avl tree during calling isadb_insert sa = 47DA6958
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2):Can not start Aggressive mode, trying Main mode.
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2):found peer pre-shared key matching 53.236.33.80
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2): constructed NAT-T vendor-03 ID
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2): constructed NAT-T vendor-02 ID
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
Mar 16 00:46:05 PDT: ISAKMP:(0:9:HW:2):Old State = IKE_READY New State = IKE_I_MM1
What does mean Find a dup sa in the avl tree during calling isadb_insert sa = 47DA6958 ?
thanks
Dominique
03-16-2010 12:29 PM
I got also
Mar 16 00:46:35 PDT: IPSEC(key_engine): request timer fired: count = 1,
(identity) local= 209.183.54.250, remote= 63.236.33.80,
local_proxy= 166.216.224.0/255.255.254.0/0/0 (type=4),
remote_proxy= 63.236.33.96/255.255.255.224/0/0 (type=4)
Why is asking to request timer fired: count = 1,
03-16-2010 12:30 PM
and i got at the end
Mar 16 00:47:05 PDT: IPSEC(key_engine): request timer fired: count = 2,
(identity) local= 209.183.54.250, remote= 63.236.33.80,
local_proxy= 166.216.224.0/255.255.254.0/0/0 (type=4),
remote_proxy= 63.236.33.96/255.255.255.224/0/0 (type=4)
Mar 16 00:47:05 PDT: ISAKMP:(0:9:HW:2):peer does not do paranoid keepalives.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide