Now I have a new issue...
I have a configured Cisco Firepower 1010 with an S2S Tunnel to an ASA 5515x (IKEv2). Traffic is flowing fine to the ASA5515. However, we also have tunnels to the remote sites and they connect IKEv1 to the ASA5515.
I have noticed messages in the Log Viewer that state “IKEv2 Negotiation aborted due to ERROR: Create child exchange failed”
Has anyone had issues with such a setup?
1010 (S2S IKEv2) --> ASA5515 (S2S IKEv2)
REM1 (S2S IKEv1 )--> ASA5515 (S2S IKEv1)
Pings and traffic from 1010 --> ASA5515 - Work
Pings and traffic from REM1--> ASA5515 - Work
Pings and traffic from 1010 --> REM1 - Does Not Work
Anyone run into this before?