01-07-2008 06:09 AM - edited 02-21-2020 03:27 PM
I've got a Cisco 1800 ISR with ADvIPServ running 12.4(11) IOS.
The problem im having is with connecting a Remote users (on Windows XP) to the Easy VPN Server on this unit.
I've configured the Ez-VPN Svr with basics and im using the name/groupname for authentication and placing the PSK in the diallin settings.
But im left with MM_NO_STATE with attempted connections.
I've run debug on isakmp and this seems to hint at key problems but i cant see how??
Any help would be appreciated...
01-07-2008 08:20 AM
Hi,
This message indicate that your Phase 1 did not complete.
Can you post your
01-07-2008 08:23 AM
01-07-2008 08:45 AM
can you post your isakmp config...
profile/policy/client config
01-07-2008 08:48 AM
Dominic,
Can you think of anything that could cause this?
Thanks
Jp
01-07-2008 08:57 AM
Probably something in the crypto isakmp client configuration or in the profiles
Question...do you really need the profiles ?
01-07-2008 09:07 AM
This is the first time i've set one of these up and have suffered the SDM initiation ;O) so im guessing these are all things setup by the wizard?
Well there isn't much to configure on the client (MS or Cisco)
01-07-2008 10:53 AM
There isn't much to configure on the client (MS or Cisco) like you said
You need profile if your have willcard Lan to Lan VPN or DMVPN and/or multiple Ez group.
If you only what to setup the EZvpn, avoid profile.
01-15-2008 01:54 AM
Resolved this. AS is oft the case, a simple over sight on my part. Thanks to those that posted a response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide