01-13-2008 08:13 PM
We are getting 8 mb of bandwidth through 4 e1s from a service provider. They have given us the following information
x.x.x.x My end IP address
x.x.x.x other end IP address
x.x.x.x Network address
x.x.x.x My end IP address
x.x.x.x other end IP address
x.x.x.x Network address
x.x.x.x My end IP address
x.x.x.x other end IP address
x.x.x.x Network address
x.x.x.x My end IP address
x.x.x.x other end IP address
x.x.x.x Network address
They told me to assign the above IPs to your E1 interface (Virtual Serial interface). I don't know how to configure the E1 cards and how to assign the above IP addresses. Please help me in this issue that how can I make the required configurations.
Solved! Go to Solution.
01-15-2008 01:50 AM
Sure, glad it helped.
Please rate useful posts using the scrollbox below!
01-14-2008 10:37 AM
controller E1 x/y
channel-group timeslots 1-31
interface x/y:0
ip address ...
ip route 0.0.0.0 0.0.0.0
Hope this helps, please rate post if it does!
01-14-2008 09:11 PM
Thanks p.bevilacqua dear it worked. :) I HAVE TO ASK ANOTHER QUESTION BUT I WILL ASK THIS IN THE NEXT POST.
01-15-2008 01:50 AM
Sure, glad it helped.
Please rate useful posts using the scrollbox below!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide