cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
890
Views
0
Helpful
2
Replies

VPN phase 2 issue

Hi

I am Abhi  I am facing problem in 2nd phase of vpn betwen two ASA . The issues the tunnel is up but in the second phase the  traffic is encrypting but not decrypting expect NAT-T what could be the issue plz let me know                  

1 Accepted Solution

Accepted Solutions

Jouni Forss
VIP Alumni
VIP Alumni

Hi,

Without any specific info the problem might also be that the remote end just hasnt allowed the connections you are attempting through the L2L VPN. In this case you wouldnt see any traffic returning from the remote end. In other words there might be a missing ACL rule in the remote end.

Do you have control of both of the ASAs? Can you share any configurations or log messages related to the problem?

- Jouni

View solution in original post

2 Replies 2

Jouni Forss
VIP Alumni
VIP Alumni

Hi,

Without any specific info the problem might also be that the remote end just hasnt allowed the connections you are attempting through the L2L VPN. In this case you wouldnt see any traffic returning from the remote end. In other words there might be a missing ACL rule in the remote end.

Do you have control of both of the ASAs? Can you share any configurations or log messages related to the problem?

- Jouni

The problem was i had port based acl and my client had configuration for ip based acl so there was the problem...

Thanks