08-22-2011 02:38 AM
Hi,
We have fresh and new ISR1921 here. We actually have a PPTP VPN for our external users. I am actually trying to assign some specific ip address to someone who connect via the VPN but I can't achieve this.
Here is the configuration:
interface Virtual-Template1
ip address 10.40.42.200 255.255.254.0
ip nat inside
ip virtual-reassembly in
peer default ip address dhcp-pool bcn-pool
no keepalive
ppp encrypt mppe auto required
ppp authentication pap
ip dhcp pool bcn-pool
network 10.40.42.0 255.255.254.0
default-router 10.40.42.1
dns-server 10.40.42.1
domain-name lafourchette.lan
lease 0 12
!
ip dhcp pool darkuja
host 10.40.42.61 255.255.254.0
hardware-address a4ba.xxxx.xxxx
!
I can see why it doesn't assign the good ip address, because it's not in the dhcp-pool list of the virtual-template but I can't see how to make this works.
Any ideas?
Solved! Go to Solution.
08-24-2011 09:39 PM
Hello Jonathan,
This type of configuration is not supported for PPTP clients.
HTH.
Raga
08-24-2011 09:49 PM
Hello Jonathan,
Hope you must be doing fine!
Well please mark the query answered, if you got the information you were looking for.
Thanks
Ankur Thukral
Community Manager- Security & VPN
08-24-2011 09:39 PM
Hello Jonathan,
This type of configuration is not supported for PPTP clients.
HTH.
Raga
08-24-2011 09:49 PM
Hello Jonathan,
Hope you must be doing fine!
Well please mark the query answered, if you got the information you were looking for.
Thanks
Ankur Thukral
Community Manager- Security & VPN
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide