cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
567
Views
0
Helpful
2
Replies

VPN site to site info

f.mottini
Level 1
Level 1

Dear all,

i have a question about VPN site to site.

this is my situation:

i have an asa with a public IP in my ced.

I have an ASA in a customer's datacenter. This ASA have a primate ip address 192.168.10.18. Is impossible to do a static 1-1 nat  on the Internt FW of the customer.

I need to perform a site to site VPN between my ASA and the ASA in the customer datacenter. There is a way to perform this lan to lan VPN?

Thanks a lot best regards.

2 Replies 2

mvsheik123
Level 7
Level 7

Hi,

The customer end ASA is behind a router? If so, you need to do a nat on the router for ASA pvt ip. Check this link..

https://supportforums.cisco.com/thread/2164143

hth

MS

Thanks,

i cant perform 1-1 nat.

The asa in datacenter only have a private ip address.