VPN

Hi Experts,I have to allow an user from the internal network behind an ASA 5520 to access an external VPN server. I've tried to connect the external VPN server from an external IP of our network and the user can connect correct correctly. When I try ...

Hi,i have an ASA5510 with the following interfaces configured:Ethernet0/0, inside, 192.168.1.xEthernet0/1, inside2, 192.168.9.xEthernet0/2, public, 193.x.x.1Ethernet0/3, outside, 194.x.x.xwhere the public interface has our public routed subnet and th...

Hi all,I have an issue accessing the inside network of my church from VPN.  This only happens when I connect from my home network. I have no problem accessing inside network of my church if I'm connected from else where (my Clear Hotspot or someone e...

Branch users are encountering a client workstation disconnection between the HQ and branch office after an idle time of 2 hours.But it does not happen to HQ users. Both side are using ASA 5505. Any config in firewall will cause this?

I have a mac osx 10.8.3 with a windows 7 64 guest os. The network for the VM has been set up as shared (not bridged). I need to access my work network via Cisco Anyconnect. If I install the mac version of cisco  anyconnect would the windows guest hav...

Hi all.  I hope somebody can help me out as this is driving me crazy! I have successfully created a site-to-site IPSEC VPN between two sites using two Cisco RV110W VPN firewalls.  I have used the basic configuration defaults on each device and have c...

I've read a few different posts about similar issues, but most of them do not really recommend any solutions.Background:- I have an ASA5505 setup at a data center in front of a few servers.- I am succesfully making a VPN tunnel to the ASA from my rem...

Hi all,can someone point me the way how i can achive (if it possible) such binding as ssl-vpn to asa and SSO to OWA with use of one-time-password (OTP) for user authentication.i'm stuck on it

hi dears.i configured site to site and remote vpns on cisco asa 5520 version 8.2. it work perfectly in last 3 years but now it is not woking.we are not do any change in the configuration. in debug show the tcp teardown and show asp: tcp drop ignore p...

When i try to install NAM, i get an error that it ended prematurely.  It also breaks my wireless networking to where i can no longer connect to, nor see, any network. Uninstalling does not fix it. I have installed it fine on other machines, its only ...

Hey is there a way to browse the internet through the vpn connectin i already have split tunneling configured but with that im not actually browsing from the remote lan internet.

I've face a  problem here,I used anyconnect-win-3.0.10057-k9.pkg ,When I had  logon and installed the client,there came out a error  dialog during the  connecting phrase,as below:Is there any configurations that I need to do? or I installed the  wron...

Hi,I've configured a remote access vpn that works fine.Now I've a trouble:The IP address assigned to my outside interface is allowed, from the firewall of my customer, to access an its natted server.I would that the traffic addressed to the public IP...