cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
11343
Views
0
Helpful
13
Replies

Vpn site-to-site phase2 fail

Hi everyone,  I Have two sites in HQ I have a C2801 as Hub, and in the remote side I have a C1861 as spoke that is getting the Ip through an ADSL , after I configured both rtrs, all Steps in Phase1 are complete, at the next Phase, I get the error IKMP_ERR_NO_RETRANS, I read a lot of entries here, but none is like the one I have.

Please can check if I missed some in the configuration. Another thing is that in the same C2801 I got a VPN Client and another vpn site to site, with fixed IP address and work perfect.

Network in Remote Side: 192.168.225.0/24 and 192.168.226.0/24

Networks in HQ: 192.168.0.0


I attached the configs and debugs.

1 Accepted Solution