Hello all!
I have the following topology:
The main task for me - is to configure the VPN without port-forwarding. Because my ASA 5505 has only one interface with public IP-address - it was decided to use it (1.1.1.1). But neither from the inside nor outside, I can not connect to it. I can not ping and can not open web-vpn portal on dmz interface of ASA. For testing purpose now all my interfaces in 100 security level with the "same-security-traffic ..." command.
Please write me what is better to do? Maybe there's command, which allows traffic to pass on the inside interface of the ASA firewall.
Thanks in advance!