03-14-2013 04:34 PM
Hey guys, I was just wondering, that the recommended practice is, for running debugs on a live firewall, with lets' say around 8 site-to-site VPNs, as well as remote access ispec vpn?
I just wanted to know the best way to run a debug for instance, for a specific vpn tunnel if that's possible.
I understand the basic show commands, and debugs, just not how to properly tune them to not crash your ASA.
Solved! Go to Solution.
03-14-2013 04:52 PM
Hi!
The comandos are:
debug crypto condition peer xxxx.xxxx.xxxx.xxxx
debug crypto ikev1 127
debug crypto ipsec 127
HTH
Portu
Sent from Cisco Technical Support Android App
03-14-2013 04:52 PM
Hi!
The comandos are:
debug crypto condition peer xxxx.xxxx.xxxx.xxxx
debug crypto ikev1 127
debug crypto ipsec 127
HTH
Portu
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide