07-30-2001 09:25 AM - edited 02-21-2020 11:23 AM
We are installing the Unified VPN Client 3.01 on workstations (both 9X and Win2k, DHCP addressed)located behind a PIX Firewall on a foreign network.
The VPN Tunnel is getting built sucessfully, the remote workstaion is getting registered in our network's WINS database, however:
1.We cannot access any resources on our network thru the tunnel, most all packets are being rejected
2.We cannot PING the remote VPN'd IP address from our PIX
3. Running 6.01 on our PIX
4. Can access resources on our net from other foreign networks and via Dial-in connections
Any ideas where the problem might be?
07-30-2001 09:41 AM
check your firewall, maybe you don't have configure the correct permitter port and address in both direction
07-30-2001 11:17 AM
On the workstations, release the ip addresses which are dynamically assigned. And then try to connect. if u have a ip address from the network behind the PIX (LAN) then you can have this problem....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide