VPN Tunnel from Nortel 600 to Cisco 3030

[paulawong]

I am trying to establish a VPN tunnel from a Cisco 3030 to Nortel 600

but i am not able to initate traffic from network A to network b, but

from network b to network a...it works fine. However, on Nework B,

there are three networks that network A need access to. Once

the tunnel is established, network a is only able to access one segment

on network b's side.

the goal is to try to access all three network segments from network a

to network b. i have verified and made sure that all three networks

are in the network access-lists.

i am using IKE proposal , esp-md5-hmac, 3des.. and IPsec 3des-preshare,

group 2.

Does anyone else have any idea how to make this work between

the Nortel 600 to Cisco 3030 or Nortell 600 to Cisco 827?

Thank you

Paula

[afakhan]

Hi

Please make sure that your Network lists are Symmetrical to what you have got on Nortel side, they need to exactly symmetrical.

Thx

Afaq

[paulawong]

Thank you for your response.

I am confused to what you mean by symmetrical.

Thanks again.

Paula

[paulawong]

HI Afaq,

Yes I have made sure that the network lists are identical on both boxes.

(pls disregard my previous email).

paula

[jdpratt]

I am facing a similar problem. Were you able to resolve this.

Thanks