VPN tunnel problem

[tung]

Hello,

Our vpn to a client is not working. This error message was log in our syslog server. Thanks

02-04-2007 22:59:51 Local0.Error 172.22.14.254 Feb 04 2007 13:54:45: %PIX-3-305005: No translation group found for udp src inside:172.22.212.217/500 dst outside:63.172.xx.xxx/500

[5220]

Hi,

This is a NAT problem.

You need to make sure you have NAT 0 in place ro traffic between vpn pool and local LAN (nat 0 (inside) acl NAT0), and NAT/PAT from the vpn pool to external public IPs (nat (inside), global (outside)).

Please rate if this helped.

Regards,

Daniel

[tung]

This is how our network is layout.

CISCO 1760>LAN>PIX515 INTERNET > Eclipse SUPPORT software vendor.

This cisco 1760 router has only one interface. This was only for support to get in to our network. I already have the nat (inside) 0 use for the remote VPN user. Is it ok to use nat (inside) 1 for this router? I am new to this. Thanks in advance.

[tung]

Hello,

I added a nat (inside) 10 0.0.0.0 0.0.0.0 0 0

now I am getting a different error. something no route to 172.22.14.10 from 65.124.xxx.xxx.