Hi,
vpnclient doesn't work on my linux box. I've googled around for days...No way .
O.S.: centos 5 - Linux 2.6.18-308.1.1.el5 #1 SMP Wed Mar 7 04:17:30 EST 2012 i686 i686 i386 GNU/Linux
selinux: disabled
IPtables: disabled (no firewall)
cisco_ipsec module: properly loaded
The symptom:
[root@john vpnclient]# vpnclient connect myprofile
Cisco Systems VPN Client Version 4.8.02 (0030)
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Linux
Running on: Linux 2.6.18-308.1.1.el5 #1 SMP Wed Mar 7 04:17:30 EST 2012 i686
Config file directory: /etc/opt/cisco-vpnclient
Enter Certificate password:
Initializing the VPN connection.
Contacting the gateway at 64.27.66.127
Negotiating security policies.
Securing communication channel.
Secure VPN Connection terminated locally by the Client
Reason: Failed to enable Virtual Adapter.
There are no new notification messages at this time.
From the log:
....
97 12:53:22.968 03/30/2012 Sev=Info/4 CM/0x43100034
The Virtual Adapter was enabled:
IP=10.255.254.27/255.255.255.0
DNS=0.0.0.0,0.0.0.0
WINS=0.0.0.0,0.0.0.0
Domain=
Split DNS Names=
98 12:53:27.481 03/30/2012 Sev=Warning/3 CVPND/0x8340001A
Failed to find VA MAC Address
99 12:53:27.481 03/30/2012 Sev=Warning/2 CM/0xC3100008
Failed to register private (virtual adapter) interface
100 12:53:27.481 03/30/2012 Sev=Info/6 CM/0x4310003A
Unable to restore route changes from file.
101 12:53:27.481 03/30/2012 Sev=Info/6 CM/0x43100037
The routing table was returned to original state prior to Virtual Adapter
102 12:53:27.488 03/30/2012 Sev=Info/4 CM/0x43100035
The Virtual Adapter was disabled
103 12:53:27.488 03/30/2012 Sev=Warning/2 IKE/0xC300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
104 12:53:27.488 03/30/2012 Sev=Warning/2 IKE/0xC30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2238)
....
Any hints?
Thanks,
Marco.
