Web SSL On interface traffic zone

[caiochaves]

I have two  interfaces configured with same Traffic Zone.

It´s possible configure SSL VPN in one interface that zone

Example:

zone internet

interface GigabitEthernet0/5

nameif ISP1

security-level 100

zone-member internet

ip address x.x.x.x x.x.x.x

!

interface GigabitEthernet0/6

nameif ISP2

security-level 100

zone-member internet

ip address x.x.x.x x.x.x.x (internet IP) ----à Can I enable SSL/Annyconnect here?

[rvarelac]

Hi caiochaves

Yes you can enabled SSL VPN on multiple interfaces , example:

Webvpn 

  enableISP1

   enable ISP2

I would add the "same-security-traffic permit inter-interface" command to allow  communication between ISP 1 and ISP 2 interface.

Just make sure the Ip address of ISP 2 is reachable from the clients.

Hope it helps

- Randy-

[caiochaves]

Hi rvarelac,

Can i use enable anyconnect mobility too?

We dont will have problems with traffic zone

[rvarelac]

Yep , you can enable Anyconnect on both interfaces simultaneously as well. And Anyconnect for mobile as well. Just make sure the mobile devices are able to reach the interface.  

-Randy-