05-16-2019 03:08 AM
Hi all,
We've got an ISR 4431 that we're trying to install Anyconnect onto and one of the commands in the guide is
webvpn gateway SSLVPN_GATEWAY
But it shows that this is an unrecognised command ?
I've done a bit of googling and some people say it's down to old IOS verison (which ours is 15.5 as far as i know) and some say it's down to NOT having the licence installed. The problem is that we've left it that late to configure this that the support with Cisco has ran out so before i go renewing it then can anyone clarify which of these two will resolve this issue or is the webvpn command not on the ISR either way and if so then what command do i use ?
Hope this makes sense.
Thanks
05-16-2019 03:19 AM - edited 05-16-2019 03:21 AM
FYI we have the security k9 licence installed but shows as evaluation right to use and inactive ? There's no SSLVPN licence that i can see though
05-16-2019 03:36 AM
09-13-2024 10:15 AM - edited 09-13-2024 10:16 AM
Hey there,
The ISR4K is not support webvpn but it supports SSL VPN
Good documentation how to make it work is here https://www.cisco.com/c/en/us/support/docs/security/ios-ssl-vpn/220267-configure-anyconnect-ssl-vpn-for-isr4k-w.html?gad_source=1&gclid=CjwKCAjwxY-3BhAuEiwAu7Y6s1XNKLysHZ-ucfOf9J6W7gxumYycX6TCiGyKlaZqgROlH-9dWsVgNBoCYwoQAvD_BwE&gclsrc=aw.ds
my is ISR4k:
cisco ISR4451-X/K9 (OVLD-2RU)
Cisco IOS XE Software, Version 17.09.04a
Cisco IOS Software [Cupertino], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 17.9.4a, RELEASE SOFTWARE (fc3)
Configured for production for one profile I couldn't do for multiple profiles:
Regards, Max
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide