Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm not that familiar with VOIP but we've got a client that has had a VOIP system and it goes out of a Cisco ISR4431 but they cannot do any internal transfers as they say the caller-id is translating to the WAN IP when it goes through the Cisc...
Hi all, Possibly something simple that i'm missing but we've got an ISR4331 and it has 4 ethernet ports on it, there are 2 on the top of the 4 ports that are labelled ge0/0/0 across BOTH of them and then ge0/0/1 and ge0/0/2 underneath. I have 3 ports...
Hi all, I've setup an ISR 4331 with a leased line and a PPPOE dial up line as backup. I have set IP SLA so when the leased line is unplugged the default route then changes to the PPPOE line but i cannot get any internet access from the lan through th...
Hi All, I've configured Flexible Netflow v9 on our ISR 4431 and it is collecting data and i've set the exporter to push it to a Prime device but it's not showing any data. I've also tried a couple of 3rd party Netflow collectors such as Solarwinds an...
Hi all, I'm struggling to find the correct dashlet on Cisco Prime to show the bandwidth usage by internal IP ? Is this possible as i keep just getting the WAN interface IP on there and not which internal IP is using what bandwidth ? Thanks
So it looks like if there's any session established (either a ping or streaming video etc) and i pull the leased line then it fails over to the FTTC line and carries on but if i try to start anything new (again either a ping or browsing etc) then it ...
Ignore that...just rebooted the Cisco (i save the config first) and now it gives me search results when i type something into Google but then when i click on the web link it then says DNS_PROBE_FINISHED_NO_INTERNET but if i play a you tube video when...
I've changed to route maps to test that and i can now get a PING response from the dialer FTTC line so that looks promising however when it now fails over to the FTTC (dialer 1) i lose DNS on the line even though i can ping 8.8.8.8 ? The odd thing is...
Yep, sorry for the delay. Here is the config although we did not set this up originally but i've added the IP SLA bits: testunit#sh runBuilding configuration...Current configuration : 21593 bytes!! Last configuration change at 09:29:16 GMT Mon Jun 22...
