Weird Requirment

[majedalanni]

I have Cisco ASA 8.2(5) and Mikrotik behind a DSL that I cannot get a static public IP fot it, I would to create a VPN connection between the Cisco Firewall that has static public IP and the mikrotik, I just confused about how to do that, I think S2S tunnel its not going to work as I don't have two static IPs in both side, so I thought if the Mikrotik can work as a Cisco VPN client. is that work and how we configure them.

Thanks in advance

Mike

[Karsten Iwen]

Try that: http://wiki.mikrotik.com/wiki/Manual:IP/IPsec#Road_Warrior_setup_with_Mode_Conf

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

[majedalanni]

I already read that, but still cannot do it, I can pass phase one but never phase two, I didn't configure the ASA with tunnle as I don't want to use the DSL IP address, so I create the configuration for remote vpn as cisco vpn and windows vpn, but I don't know how to configure the mikrotik to make it as a L2tip/ipsec VPN client