02-08-2007 11:56 PM - edited 02-21-2020 02:51 PM
I'm running a PIX-506E at my home and another one at a business. I have remote VPN setup through the remote PIX so I can connect to it from my Sprint card and the VPN software. The problem is my PIX wont let the session connect to any of the PC's on the other end. It will secure the channel, encrypt and connect, but wont let me access anything.
Is there something I'm missing here? Although I don't really know how to forward ports with the PIX software I just bought it... so maybe this would be a good time to learn.
Thank you!!
Mike Jankowski
Computer Systems Consultant
02-14-2007 05:42 AM
Hi..
yu might need to enable "isakmp nat-t" on the headend pix.
HTH,
Kanishka
02-14-2007 07:17 AM
Hi Mike,
Apart from enabling NAT-T on the headend PIX, please also make sure that UDP 4500 is allowed on the PIX the VPN client is connecting through.
HTH.
Kamal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide