11-20-2013 01:32 PM
Hi
I have few CISCO routers. Could you please tell me which of the following can be configured as termserver?
CISCO 1900
CISCO 2600
CISCO 2820
CISCO 2950
CISCO 3200
Also pls mention wat other module or hardware is needed?
Thanks
Navaz
Solved! Go to Solution.
11-20-2013 01:47 PM
Hi,
You need a Async module. You can use a 2500 or 2600 router as term server.
Thanks,
Nagendra
11-21-2013 07:59 AM
HI Abdul,
You can use 2500, 2600 2800 series....and you also need asynchronous module.
here is the link for req.
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd800f414c.html
Hope it helps.
Reagrds
Dont forget to rate helpful posts.
11-22-2013 07:44 AM
In addition to the mentioned router/module combinations, each router with an AUX-port can be a single-line terminal-Server.
A basic-config can be simple as the following:
line 33 48
no exec
transport input telnet
transport output none
Just replace "line 33 48" with the lines that your NM-8A provides ("show line" gives you that information).
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-20-2013 01:47 PM
Hi,
You need a Async module. You can use a 2500 or 2600 router as term server.
Thanks,
Nagendra
11-21-2013 07:59 AM
HI Abdul,
You can use 2500, 2600 2800 series....and you also need asynchronous module.
here is the link for req.
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd800f414c.html
Hope it helps.
Reagrds
Dont forget to rate helpful posts.
11-22-2013 07:36 AM
Hello
I donot have NM-16A module , but I have NM-8A module. Can this be used in cisco 2600 to configure it as term server ?
Also pls mention the steps to configure.
Thanks in advance.
11-22-2013 07:41 AM
Hi Abdul,
Yes You can use this on 2600 Router to configure as Terminal Server.
Please take a look on these docs.
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_nm16as.html
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
Reagrds
Dont forget to rate helpful posts.
11-22-2013 07:44 AM
In addition to the mentioned router/module combinations, each router with an AUX-port can be a single-line terminal-Server.
A basic-config can be simple as the following:
line 33 48
no exec
transport input telnet
transport output none
Just replace "line 33 48" with the lines that your NM-8A provides ("show line" gives you that information).
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-22-2013 10:40 AM
Thanks a lot. But I couldn't get which cable i should use connect NM-8A to console port of a router. NM-8A which looks like this.
RJ-45 cable is not working.
Please suggest .
Thanks
11-22-2013 11:24 AM
HI Abdul,
please check here:
http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b8b.html
Reagrds
Dont forget to rate helpful posts.
11-22-2013 11:36 AM
you need an octal-cable CAB-OCTAL-ASYNC. They are often sold on ebay.
Sent from Cisco Technical Support iPad App
11-22-2013 01:33 PM
Octal cable is looks like this.
my 8AM modem is looks like this.
How can we connect ?
11-22-2013 01:49 PM
That's the right cable, at least when you want to connect to the console port of a cisco router which needs an RJ-45 connection. Or do you want to connect to something else? Your Google-Link doesn't show anything.
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide