I have an ASA5505 that I have configured properly to work with Windows XP's built in vpn client. I try to get Windows 7 up and running and I continually get an error 789 on the client itself. I also get the following on the ASA:
| 3 | May 07 2010 | 01:04:53 | 713119 | | | Group = DefaultRAGroup, IP = , PHASE 1 COMPLETED |
| 5 | May 07 2010 | 01:04:53 | 713904 | | | Group = DefaultRAGroup, IP = , All IPSec SA proposals found unacceptable! |
| 3 | May 07 2010 | 01:04:53 | 713902 | | | Group = DefaultRAGroup, IP = , QM FSM error (P2 struct &0x429a740, mess id 0x1)! |
| 3 | May 07 2010 | 01:04:53 | 713902 | | | Group = DefaultRAGroup, IP = , Removing peer from correlator table failed, no match! |
| 4 | May 07 2010 | 01:04:53 | 113019 | | | Group = DefaultRAGroup, Username = , IP =, Session disconnected. Session Type: IPSec, Duration: 0h:00m:00s, Bytes xmt: 0, Bytes rcv: 0, Reason: Phase 2 Mismatch |
I was getting the same issue when with the xp client until I removed the PFS on the IPSec rule. I cannot seem to figure this one out...
Thank you very much in advance for everyone's help.
