VPN

Hello,I configured the SSL VPN feature on a 1941 ISR running IOS 15.01M in order to use the AnyConnect client. However, after I open the welcome portal, where you have to type in a username and a password, I get a message "Login failed" before I even...

Hello,I am using a ASA 5520, I have a VPN setup already to a remote office using subnet 172.16.x.x/16 and it all works well and I don't want to change this.  Now I need to setup another VPN to another office which is also using 172.16.x.x/16.  This n...

I have created a SSL VPN on a 1841 router. When I enter the IP address of the router in browser I get prompted to enter username and password. I get logged in however the SSL VPN Client does not download to the client. Does anyone know what can be mi...

Trying to configure this using all CLI as I have not had much luck getting these to work with ASDM.  I was able to get the VPN client to connect and to pick up an IP address from the pool I created but now I cannot ping or access anything on the inte...

Cisco Universe,       I would like to setup a redundant VPN connection to one of my vendors via a second ISP.  Both ISP's terminate at a load balancer with the ASA being accessible with public IP addresses.  The remote termination would be the same I...

I am replacing a 3015 concentrator with a 2801 sec-bundle router.     The public interface of the concentrator sits in the 'public dmz' of our ASA.  The private interface of the concentrator sits in an internal dmz on of the ASA.     I currently have...

I have a primary MPLS router doing HSRP with an 1841. The 1841 has an HWIC-3G-CDMA-V that I am using for the internet connection. I really only need to create a tunnel from the 1841 to the ASA at my Hub. The problem is that the cellular call is dropp...

Hi all,i have the evaluation ACS 5.0 version installed and have an issue with the local certificate.I want not use a self signed certificate but a company certificate.I did the following steps :1. In System Administration/Local Server Certificate/Loc...

Hello,I am in the process of preparing to upgrade our ASA to software 8.x to add support for the Anyconnect client, as we are looking to provide VPN connectivity for Win7 and 64 bit computers.I have two questions.1. I want to know if we will still be...

I am creating a VPN network of  7 ASA5505 s.    One device is the central or hub device.( Attachmnent  Main5505)All ASA5505 devices running  ver   7.2(4)there will be site to site tunnels to 6 other 5505 s across the internet. Currently there are 4 o...

Hello all,We were able to establish a VPN connection from our ASA 5510 to a Windows XP laptop using the VPN Client. However, when we tried accessing the internet or any of the files from our network, the request could not be found. We tried pinging d...

I've got a site to site ipsec vpn setup between myself and a nother location. At my site is a Cisco 877-M at the other site is ISA Server 2006.The ipsec to site2 is up and I can ping machines on the LAN in both directions.At my site port 80 is forwar...