I am trying to setup a wireless lan for the first time using 5508, all is working to a point, until i try to setup client authentication using the following
so settings are:
Layer Wlan settings:
Layer 2 security:WPA+WPA2
AES
Auth Key mgmt:802.1x
We have the authentication server enabled:
Ip an port are correct
AAA overide not enabled
Order for authentication, radius only
Advanced: dafault settings
Radius authentication servers:
Call Station ID Type: IP address
MAC Delimiter: Colon
| ||||||||||||||||||
| Server Index | |||
| Server Address | |||
| Shared Secret Format | |||
| Shared Secret | |||
| Confirm Shared Secret | |||
| Key Wrap | (Designed for FIPS customers and requires a key wrap compliant RADIUS server) | ||
| Port Number | |||
| Server Status | |||
| Support for RFC 3576 | |||
| Server Timeout | seconds | ||
| Network User | Enable | ||
| Management | Enable | ||
| IPSec |
| ||
*radiusTransportThread: Dec 21 12:07:46.488: %AAA-4-RADIUS_RESPONSE_FAILED: radius_db.c:412 RADIUS server X.X.X.X:1812 failed to respond to request(ID 115) for STA 00:19:d2:b9:d5:e1 / user 'unknownUser'
*radiusTransportThread: Dec 21 12:07:46.012: %AAA-4-RADIUS_RESPONSE_FAILED: radius_db.c:412 RADIUS server X.X.X.X:1812 failed to respond to request(ID 114) for STA 00:19:d2:b9:d5:e1 / user 'unknownUser'
*Dot1x_NW_MsgTask_1: Dec 21 12:07:29.811: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3028 Max EAP identity request retries (3) exceeded for client 00:19:d2:b9:d5:e1
*Dot1x_NW_MsgTask_1: Dec 21 12:07:29.811: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication aborted for client 00:19:d2:b9:d5:e1
*radiusTransportThread: Dec 21 12:07:16.412: %AAA-4-RADIUS_RESPONSE_FAILED: radius_db.c:412 RADIUS server X.X.X.X:1812 failed to respond to request(ID 113) for STA 00:19:d2:b9:d5:e1 / user 'unknownUser'
*Dot1x_NW_MsgTask_1: Dec 21 12:06:59.741: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3028 Max EAP identity request retries (3) exceeded for client 00:19:d2:b9:d5:e1
Radius server occasionally sees attempts from user "XXZZYY"
