ā12-11-2023 08:25 AM
Hello,
I have 2 Cisco web appliance in different location, I went to replicate Policies from the first appliance to second appliance without IP address changes. And hostname .....
N.B : it's take time for me If I create policies from scratch on the second appliance.
Please let me know if there is any method to do that.
Thank You in advance for your help.
Solved! Go to Solution.
ā12-12-2023 04:11 AM
2 Option you when to backup config,
1. it give you option with network settings.
Load Network Settings (check box) if that is not ticked it only restore the config you looking.
Basic network settings (interface configuration, routing tables, and DNS settings) will be retained unless the option to load network settings is selected.
2. you can edit the XML file and update with any IP information need to change and use that config XML to restore.
ā12-13-2023 07:04 AM
As Balaji Mentioned,
By default the "Load Network Settings" is un-checked, you can import the config to 2nd WSA,
Kindly be advised, to double check the certificates ( decryption / ISE / ... ) to make sure they are correct.
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
ā12-11-2023 09:30 AM
yes you can do config backup and restore as long as AsyncOS running same version of code.
ā12-12-2023 12:15 AM
If I do restore on the second appliance, It will replicate the IP addressee also, which I don't went.
I only went to replicate Policies .
ā12-12-2023 04:11 AM
2 Option you when to backup config,
1. it give you option with network settings.
Load Network Settings (check box) if that is not ticked it only restore the config you looking.
Basic network settings (interface configuration, routing tables, and DNS settings) will be retained unless the option to load network settings is selected.
2. you can edit the XML file and update with any IP information need to change and use that config XML to restore.
ā12-14-2023 02:12 PM
Thank Your for your anwser
ā12-13-2023 07:04 AM
As Balaji Mentioned,
By default the "Load Network Settings" is un-checked, you can import the config to 2nd WSA,
Kindly be advised, to double check the certificates ( decryption / ISE / ... ) to make sure they are correct.
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
ā12-14-2023 02:13 PM
thank You for answer .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide