01-28-2020 12:23 PM
Hello Folks!
I need to install a Virtual SMA to manage 05 WSA S300.
I found the link below about the installation but is confusing, in some point says is necessary 1024GB/08GB/04 (disk/memory/processor) and in another part say is necessary a UCS server.
Now I don´t know if I can install in a normal server such as Dell ou if it is obligated to buy a UCS server.
Thanks
Marcio
Solved! Go to Solution.
01-28-2020 12:58 PM
01-28-2020 12:58 PM
01-28-2020 01:00 PM
Hi Marcio,
The supported Hardware is Cisco UCS, if you're using Dell or other hardware vendor - if there's any issue, cisco will provide "best effort" support, as stated on page 8 (https://www.cisco.com/c/dam/en/us/td/docs/security/content_security/virtual_appliances/Cisco_Content_Security_Virtual_Appliance_Install_Guide.pdf#page8)
In short: From a lab perspective, it could work - but for production, I would not recommend doing so.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: