02-19-2014 10:25 AM
Hello Dear Sirs!
I have network topology, like we can see on the picture.
I have ASA inside interface and WSA P1 interface, in the one L2 segment, but users and Active Directory in other L2 segments.
Can I use WSA as transparent proxy? and WCCP redirect I must do on the ASA or Catalyst?
Thanks!
------------------------------------------------------
Helping seriously ill children, all together. All information about this, is posted on my blog
02-19-2014 11:27 AM
As long as both the client segments and the WSA are off of the same interface of the ASA you can do WCCP with the ASA and WSA. Based on your topology provided WCCP with the ASA should work.
Hope this helps.
Best Regards,
Michael Hautekeete
Customer Support Engineer
Cisco Content Security - Web Security Appliance
http://www.cisco.com/en/US/products/ps11169/serv_group_home.html
https://supportforums.cisco.com/community/netpro/security/web
https://supportforums.cisco.com/community/feeds?community=2091
02-19-2014 11:58 AM
Thanks!
------------------------------------------------------
Helping seriously ill children, all together. All information about this, is posted on my blog
02-19-2014 11:28 AM
Yes you can use it as a transparent proxy.
You can do the WCCP on either the ASA or the 6500...
There is more documentation floating around in this forum about doing it on the ASA. Make sure you're at 8.2 or higher on the ASA... earlier versions had stability issues in the WCCP code.
02-19-2014 11:32 AM
Here's a doc on how to do it on an ASA...
02-19-2014 11:58 AM
Thanks!
I try to do it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide