01-13-2015 08:37 AM
Hi folks,
There's limited documentation on this so I thought I'd check if someone else has run through it already or can point me toward a document...
I've installed the Context Directory Agent and want to configure the WSA as a Customer device however I cannot find any documentation on doing so. I have followed a great document from Poonguzhali Sankar on configuring the old AD Agent on the ASA, I have used some of this config to configure the ASA as a Customer device on the CDA. Has anyone configured the WSA as a Customer device on the CDA or can point me toward a doc?
Rgds,
Karl.
Solved! Go to Solution.
01-13-2015 09:42 AM
I have... Make sure you get all the patches for CDA installed. There are 4, and you have to install each one, in order.
Once that's done, log into the WSA, go to Network/Authentication. Create a realm for your AD. Under "Active Directory Agent" check the box for "Enable Transparen User Identification..." Enter the CDA name or IP, and a shared secret.
Open a browser and go to https://<ip of the CDA>, login as 'Admin' with the password you set.
Add the AD servers in the gui...
Add the Identity Consumers in the gui...
01-13-2015 09:42 AM
I have... Make sure you get all the patches for CDA installed. There are 4, and you have to install each one, in order.
Once that's done, log into the WSA, go to Network/Authentication. Create a realm for your AD. Under "Active Directory Agent" check the box for "Enable Transparen User Identification..." Enter the CDA name or IP, and a shared secret.
Open a browser and go to https://<ip of the CDA>, login as 'Admin' with the password you set.
Add the AD servers in the gui...
Add the Identity Consumers in the gui...
01-15-2015 05:36 AM
Much appreciated Ken, spot on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide