08-13-2007 11:50 PM
Hello citizens! I've been having lot of trouble with an WSA. It runs too slowly. Some times a web page is displayed 5 or 6 minutes after I requested it. Has anyone found this kind of trouble? If so I would really appreciate some advice:
blopez@caveo-net.com
Regards.
Bernardo
08-14-2007 05:10 PM
Bernardo,
There is something definitely wrong if it's taking 5 - 6 minutes to display a page. The best way to analyze this would be to work directly with Iron Port support.
Many things can be a factor in this.
How are you deployed, transparently or explicitly?
Are you doing authentication? If so, have you tried disabling auth?
Are you using internal or external DNS servers?
The WSA should be as fast as the network / DNS / authentication servers. Unless it is being over encumbered.
How many connections do you have running through it at once? You can check with the CLI command "rate".
08-15-2007 05:38 PM
The appliance is running as a explicit forward, it has internal DNS only and I guess the trouble will be solved when the customer opens up port 53 so I can use Internet Root DNS servers, but he's been reluctant to do so. I'm working on it. Thanks on the rate command it will be very helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide