ā04-24-2024 06:45 AM
hello all,
is it possible to access physical cisco WSA GUI without license ???
Solved! Go to Solution.
ā04-25-2024 12:51 AM - edited ā04-25-2024 12:52 AM
Hello @yoseph
As Balaji mentioned, you can access the GUI, even without any license,
in case, you need to do some network configuration from CLI to be able to access the WSA:
[+] from CLI issue ifconfig > edit > select Mangement interface , follow the wizard to add IP address and GUI Port number.
[+] from CLI issue setgateway command to set the default gateway
[+] from CLI issue commit, to save the changes.
Note: if you are seeing Certificate Error while trying to access GUI
[+] from CLI> issue sslconfig > VERSIONS > Choose the number associated with WebUI > enable TLSv1.2 > press enter to exit the wizard
[+] from CLI issue commit, to save the changes.
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
ā04-24-2024 08:24 AM
Sure why not - by default it come with 90days eval license.
even it expired still you can access the GUI - because of the License expiry Functionality may vary.
ā04-25-2024 12:51 AM - edited ā04-25-2024 12:52 AM
Hello @yoseph
As Balaji mentioned, you can access the GUI, even without any license,
in case, you need to do some network configuration from CLI to be able to access the WSA:
[+] from CLI issue ifconfig > edit > select Mangement interface , follow the wizard to add IP address and GUI Port number.
[+] from CLI issue setgateway command to set the default gateway
[+] from CLI issue commit, to save the changes.
Note: if you are seeing Certificate Error while trying to access GUI
[+] from CLI> issue sslconfig > VERSIONS > Choose the number associated with WebUI > enable TLSv1.2 > press enter to exit the wizard
[+] from CLI issue commit, to save the changes.
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
ā04-25-2024 04:48 AM
thanks all.
could you mention please the upgrade cisco wsa physical appliance. my current version is
11.8.0-453 |
and currently available versions are about 35 up to 15.2.0 so it takes time please share the right path
ā04-25-2024 10:00 AM
I would say it is best to check the release notes :
Release Notes for AsyncOS 15.2 for Cisco Secure Web Appliance - Cisco
you can see the upgrade path, known issues and fixed issues.
Kindly be advised, you need to have Smart License , as "Mandatory Smart License for Secure Web Appliance
you can see the changes from above link, also to view the history of the changes:
again, please before upgrade review the list of known issues
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide