Hello
New version WLCCA 4.4.3:
Added
- Support for 802.11FT adapative state
- WLAN name for message "mDNS profile is configured in WLAN.."
- Improved logic for message "General: The IPv6 Multicast/Broadcast mode is on Unicast.", to only report if IPV6 is enabled, and mcast/base fw is in use
- Flex group name in message "Flex: Efficient AP upgrade is not enabled for Flex group:"
- Improved logic for message "General: Aggregation scheduler disabled", now checks if 11n/ac is enabled, and the message includes band affected
- Added interface name for message "General: DHCP enabled on the interface, but DHCP IP is not configured.", also improved logic to skip if the interface is a wired guest type
- Added wlan name to message "General: 11v is enabled, it is recommended to have the MFP infrastructure disabled."
Fixed
- Incorrect parsing of DHCP proxy state
- Incorrect handling of NTP sync status
- Radius server parsing
- Incomplete parsing of DCA/TPC/ED-RRM status
- Proper detection of lag mode for UCS platforms
- Typo for message 30063
- Fixed parsing of 802.11b aggregation scheduler
- Modified message "Platinum QoS settings are not set to 802.1p 5 or 6, check in Controller QoS Profiles" to use 5 or 6, instead of 6 or 7
https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=wlc-conf-app-dev