Introduction
In the 15.2(2)JA release, Cisco supports running autonomous IOS (aIOS) only in "site survey" mode on the 3500, 3600 and 1550 Series Access Points.
Full feature support for 3500, 3600 and 1550 Series APs is only when running in lightweight mode (Cisco Unified Wireless Network.)
The following 15.2(2)JA aIOS images can be used in "site survey" mode on these APs:
- ap3g1-k9w7-tar.152-2.JA.tar - this image can be used on a 1260 series AP with full feature support, or on a 3500 series AP in "site survey" mode
- ap3g2-k9w7-tar.152-2.JA.tar - this image can be used on a 2600 series AP with full feature support, or on a 3600 series AP in "site survey" mode
- c1520-k9w7-tar.152-2.JA.tar - this image supports only the 1550 series AP, and only in "site survey" mode.
"Site survey" mode is a subset of aIOS functions, and is defined in the 15.2(2)JA Release Notes. There is no specific new feature to configure "site survey" mode; simply configure the desired functions on the access using ordinary IOS commands..
For more information on AP IOS, see the article Understanding Access Point IOS Images.