How to configure the time based access list on BVI interface of the access point .

[TCC_2]

Core Issue

Time Based access list (ACL) can be defined either on the Fast Ethernet port or on the Radio port of the access point (AP) as per your requirements. It is never applied on the BVI Interface.

Resolution

This is an example on how to configure Time Based ACL. In this example, a Telnet connection is permitted from the inside to outside network on Monday, Wednesday, and Friday during business hours:

interface Ethernet0/0
ip address 10.1.1.1 255.255.255.0
ip access-group 101 in 

access-list 101 permit tcp 10.1.1.0 0.0.0.255 172.16.1.0 0.0.0.255 
eq telnet time-range EVERYOTHERDAY

time-range EVERYOTHERDAY
periodic Monday Wednesday Friday 8:00 to 17:00

• Refer to the Filters Using Time-Based ACLs section of Access Point ACL Filter Configuration Example for more information on how to configure the time based ACL.
• Refer to Configuring Filters for more information on Filters and Access List.

Problem Type

Configure / Configuration issues.

Products

Access point

Product OS

IOS

Device Access Method

GUI Interface

Terminal Server / Console