Resolution
The EAP retry limit reached for Station error message in the log on Access Points (APs) or wireless bridges can be caused by the following:
- Wrong user name and password and too many attempts on the client.
- The AP and AAA server are on a congested network.
Suggested workarounds
1. Make sure the user name and password is right. Do not make too many attempts. If the problem occurs for a particular client in the network upgrade firmware , drivers and utility of the client.
2. Verify if the Radius server is up . On a congested network increase the RADIUS Message Transmission Interval to prevent WLC from declaring server down very soon.
3. Upgrade the firmware of the access point to fix the timeout issues, restart and reconfigure the access point. Also make sure shared secret between the access point and Radius server is fine.
Problem Type
Client / Device cannot authenticate
Error message
Products
BR 350
WLAN adapters (wireless card) / ACU (Aironet Client Utility)
AP 340, 350
AP 1200
BR 340