1131 AP cannot connect to VWLC 8.0.115.0

[roger perkin]

I have installed the VWLC 8.0.115.0 onto my home ESXi server and am trying to associate a 1131 AP 

I have read quite a lot about the subject and have tried a variety of images on the AP from the very latest to currently 

c1130-k9w8-mx.124-25e.JAM4

The AP and the controller are on the same subnet but no joy.

I have entered the capwap ap controller ip address but it will not associate. 

I have read that I should connect the AP to a physical controller 7.3 and above and download the image and then it will connect to the VWLC. 

I have also added the MAC address into the AP Policies section. 

Is there anything on ESXi that needs to be enabled on the firewall side?

Hope someone can help.

UPDATE: Problem Resolved!!!!

My issue was very simple and was nothing to do with images on the AP. 

I had not accepted the license agreement and 0 AP's were supported on the controller. 

Go to Management / Software Activation / Licences / Clicked on the License and changed priorty to High.

Then 200 APs are now supported and my 1131 AP started downloading its image! and is now online

Thanks

Roger

[Scott Fella]

Glad you figured this out!  +5 for editing your post and providing the solution that solved your issue.

Edit: 

Wow... I can't even rate your post.... another thing that they need to fix with this new platform Cisco is on!

-Scott

[roger perkin]

Thanks Scott, 

It was a few of your posts I was reading about getting the right image on the AP first or connecting it to a physical controller. 

Its a sweet solution, perfect for labbing