1811 wireless config

[networking]

I am trying to configure my dot11radio0 interface with an ssid of test on an 1811 router. Has anyone done this before? Here is my current config.

interface Dot11Radio0

no ip address

!

ssid test

!

speed basic-54.0

channel 2437

beacon period 20

beacon dtim-period 1

station-role root

[r-simpson]

Yes this configuration is right.But using only 54.o mbps allows the connection only at 54 Mbps.In case if the data rates drops on the clients due to interference or weak signal strength clients would be dropped.Try configuring lower basic data rates.