04-13-2006 04:51 AM - edited 07-04-2021 11:56 AM
We have installed a 2000 series wireless controller and connected an 1131 series access point. The controller detects the access point but returns several error messages. For instance: Refusing Image Download
Any ideas?
Thanks
Solved! Go to Solution.
04-13-2006 10:21 AM
i had a similar problem last week. you need to donwload the latest firmware for the controller. i called the tac and they had me download the latest firmware and that took care of it. personally, i can't believe they would ship such a poor firmware, but that appears to be the problem.
good luck.
04-13-2006 10:21 AM
i had a similar problem last week. you need to donwload the latest firmware for the controller. i called the tac and they had me download the latest firmware and that took care of it. personally, i can't believe they would ship such a poor firmware, but that appears to be the problem.
good luck.
04-13-2006 11:08 AM
10-4
You're exactly correct, that fixed it. Thanks for the reply.
04-25-2006 07:28 PM
Thanks for all the postings on 2006 Controller. Would like to know how to upgrade 2006 with 2.2 firware to the latest 3.2.always get an error "Insufficient Flash Memory" error when the new firmware is extracted.
Thanks for your help,
Best Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: