7925G unable to connect to wireless

[peter.warwick]

Cisco WLC 5508 showing the following error messages.

*apfMsConnTask_5: Dec 01 10:29:00.415: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

*apfMsConnTask_5: Dec 01 10:28:58.774: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

*apfMsConnTask_6: Dec 01 10:28:58.534: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

*DHCP Client Task: Dec 01 10:24:26.094: #DHCP-3-BIND_SRPORT_ERR: dhcp_support.c:373 Binding service port failed.

*apfMsConnTask_6: Dec 01 10:18:23.690: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

*apfMsConnTask_5: Dec 01 10:18:23.254: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

*apfMsConnTask_4: Dec 01 10:18:22.840: #APF-3-CHECK_SUPP_RATES_FAILED: apf_utils.c:205 Could not check supported rates. Invalid Supported Rates from station . Length :0. Mobile MAC: 30:f7:0d:4d:6e:11.

Does anyone have any ideas?

[Scott Fella]

Take a look at what data rates you have supported and what you sent as mandatory. Also look at the client that the error is pointing to.

-Scott 

*** Please rate helpful posts *** 

[Leo Laohoo]

The default data rates for the 7925G is 12 Mbps.  

So what data rates are enabled Globally (and/or RF Profiles)?