877W with Wlan-GigabitEthernet0 and wlan-ap0

[hardinfw]

Does anybody have config guides how to configure a 887W with an embedded AP?

[Scott Fella]

You can look at these links

http://m.techrepublic.com/downloads/generate-your-own-ready-to-use-cisco-871w-configuration-with-this-handy-tool/243375

http://m.techrepublic.com/article/configuring-the-cisco-851w-or-871w-standard-ios/6112367

Thanks,

Scott Fella

Sent from my iPhone

[hardinfw]

Hi Scott. Thanks but these also indicate the old type of interfaces. The 877W router has the new IOS 15.1(4)M1 and have Wlan-GigabitEthernet0 and wlan-ap0 interfaces...The normal way of configuring the WLAN can not be followed...

[Scott Fella]

Okay... This one should help.

http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns430/ns855/white_paper_c11-492842.html

Thanks,

Scott Fella

Sent from my iPhone