Adding access points

[Tarun1]

Hi All,

Sorry in advance if this comes across as a dumb question.

Background - Currently have a 2702 model AP connected to a 2960 switch in a large warehouse setting.

We want to add two more WAPs in the area. Due to the location it is not easy to run extra cabling back to the switch so I was wondering if a small 4 port PoE switch plugged into the single data point at the location will do the trick i.e. run three WAPs.

In effect the three WAPs will be running off a single port on the 2960 switch.

Cheers.

[Leo Laohoo]

Data Sheet:  Cisco Catalyst Micro Switches

The CMICR-4PT would be ideal for your deployment.  
NOTE:  There is a dual-personality SFP/Copper in the back of this unit (not included in the picture).

[Tarun1]

Thank you @Leo Laohoo 

What about something simple like this - https://www.tendacn.com/au/product/teg1105p-4-63w.html