Hi wireless experts,
today I come around with a weird request. Let's say I'm collecting "show controllers" outputs from Aironet 1552E outdoor APs for the 2,4GHz and 5GHz radio interfaces from different regulatory domains (weird what people collects nowadays).
Here's an example for the "-E" regulatory domain
ap#show controllers dot11radio1
[...]
Carrier Set: ETSI (OFDM) (EU) (-E)
Uniform Spreading Required: Yes
Configured Frequency: 5700 MHz Channel 140 (DFS enabled)
Allowed Frequencies: 5500(100) 5520(104) 5540(108) 5560(112) 5580(116) 5660(132) 5680(136) 5700(140)
Listen Frequencies: 5180(36) 5200(40) 5220(44) 5240(48) 5260(52) 5280(56) 5300(60) 5320(64) 5500(100) 5520(104) 5540(108) 5560(112) 5580(116) 5600(120) 5620(124) 5640(128) 5660(132) 5680(136) 5700(140) 5745(149) 5765(153) 5785(157) 5805(161) 5825(165)
Beacon Flags: 0, Interface Flags 20105, Interface Events 0, Mode 9; Beacons are disabled; Probes are disabled; Backhaul enabled; Backhaul UA disabled
Configured Power: 23 dBm (level 1)
Active power levels by rate
6.0 to 54.0 , 19 dBm, changed due to regulatory maximum
6.0bf to 54.0bf, 16 dBm, changed due to regulatory maximum
m0-2 to m15-2 , 19 dBm, changed due to regulatory maximum
m16-2 to m23-2 , 0 dBm, changed due to regulatory maximum
m0-4 to m15-4 , 20 dBm, changed due to regulatory maximum
m16-4 to m23-4 , 0 dBm, changed due to regulatory maximum
6.0d to 54.0d , 20 dBm, changed due to regulatory maximum
m0b2 to m23b4 , 0 dBm, changed due to regulatory maximum
OffChnl Power: 19, Rate 6.0
Allowed Power Levels: 7 11 17 20 23
[...]
The section of the output I postet above is enough for my needs.
It would be really cool to have the outputs for the 2,4 GHz (dot11radio0) and 5 GHz (dot11radio1) radios for the following regulatory domains:
-C, -A, -Q, -N
If someone stumbles upon this topic with a model from another regulatory domain, feel free to post it here as well
Thank you so much in advance for your help!!!
Best regards
Johannes