Re: BR1310 restarting problem

s.abubasheer · ‎01-21-2006

Hi Mates,

Please I need your help to fix my old br1310 restarting problem I did a software upgrade but still can't pass it!! next is show version command result:

bridge#show version

Cisco IOS Software, C1310 Software (C1310-K9W7-M), Version 12.3(7)JA2, RELEASE S

OFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 18-Nov-05 12:55 by ssearch

ROM: Bootstrap program is C1310 boot loader

BOOTLDR: C1310 Boot Loader (C1310-BOOT-M) Version 12.3(2)JA3, RELEASE SOFTWARE (

fc2)

bridge uptime is 2 hours, 2 minutes

System returned to ROM by unknown reload cause - reason ptr 0xF, PC 0x6392F8, ad

dress 0x0

System image file is "flash:/c1310-k9w7-mx.123-7.JA2/c1310-k9w7-mx.123-7.JA2"

here also another reload

bridge uptime is 35 minutes

System returned to ROM by unknown reload cause - reason ptr 0xF, PC 0x6393B0, ad

dress 0x0

System image file is "flash:/c1310-k9w7-mx.123-7.JA2/c1310-k9w7-mx.123-7.JA2"

Regards

saher

a-vazquez · ‎01-27-2006

I think the there is a hardware problem with the Bridge. That is the reason the bridge keeps rebooting. Are you using a power injector for this bridge. If so can you use a different power injector and check if it works.