06-16-2016 01:07 AM - edited 07-05-2021 05:14 AM
I used Aironet1700 [AIR-CAP1702I-Q-K9].
I changed [Autonomous Mode] by <capwap ap autonomous> command.
But I want to return [Lightweight Mode].
Please tell me how can I do.
06-16-2016 02:03 AM
Hi,
Paste the output of this command:
sh version from AP.
Please check these posts to convert AAP to LAP.
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://www.youtube.com/watch?v=wWDrFjwVNb0
https://www.youtube.com/watch?v=Fiv76UpStKI
Regards
Dont forget to rate helpful posts
06-19-2016 10:44 PM
Hello.
Thank you for your advice.
I found this url and tried them.
As a result, we were able to change.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01101010.html
Regards
06-19-2016 11:12 PM
Hi,
Did my post solved your problem then please mark this question as answered. It may help others.
Regards
Dont forget to rate helpful posts
06-20-2016 06:04 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide