11-16-2018 02:10 AM - edited 07-05-2021 09:28 AM
Hello,
I have Cisco 2504 controller working with nine AIR-CAP702I-E-K9 without problem. I bought new one AIR-AP1832I-E-K9 and it is visible in wireless section but my mobile devices can only connect to the AIR-AP1832I-E-K9 but don't connect with other parts of my network, can't connect with program and database located on server.Wireless and Mobility
11-16-2018 02:27 AM
@pbutwilo wrote:
Hello,
I have Cisco 2504 controller working with nine AIR-CAP702I-E-K9 without problem. I bought new one AIR-AP1832I-E-K9 and it is visible in wireless section but my mobile devices can only connect to the AIR-AP1832I-E-K9 but don't connect with other parts of my network, can't connect with program and database located on server.Wireless and Mobility
What firmware is the controller running on?
11-16-2018 03:11 AM
Software Version | 8.3.143.0 |
11-16-2018 06:18 AM - edited 11-16-2018 06:19 AM
Maybe I can describe the problem more precisely. Warehouse workers uses portable devices Honeywell Dolphin 6500 and if they are in room where this device is connected to AIR-AP1832I-E-K9 if you send PING to the Server, it is not reachable. If you change this place to other, where you are connected to AIR-CAP702I-E-K9, no matter which of the nine I have, all is OK, ping is normal.
11-16-2018 03:46 PM
11-19-2018 07:27 AM
Now I have big big problem. I can't connect with WLC. I upgrade the FUS with file AIR-CT2500-K9-2-0-0-0-FUS.aes and now I can't log into WLC. The IP adress was 192.168.1.230 and now its unreachable.
11-19-2018 07:30 AM
LED PWR is solid green, SYS is fast blinking green and ALM is solid green.
11-19-2018 10:01 PM
11-20-2018 01:10 AM
After more than hour waiting Controller started, and now all is ok I think. Ufff. I was little afraid.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide