Cisco Wireless :: Is CAP1602I-E-K9 is compatible with AIR-CT2504-15-K9 controller? IF yes then How t...

paragkolhe2008 · ‎04-11-2015

Cisco Wireless :: Is CAP1602I-E-K9 is compatible with AIR-CT2504-15-K9 controller? IF yes then How to configure 1600 series access point ?

I want to configure CAP1602 access point with controller 2504 model to enable wifi access with secure Impact ..

Is this access point accept capwap ap commands or let me know what commands are for config ?

Rgds,

Parag

Rasika Nayanajith · ‎04-11-2015

Yes, it is compatible. Make sure AP came with lightweight image & your 2504 is having software code anything above 7.4.100.0

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

If this AP is WLC managed, you do not require to do any config on AP, all config doing via WLC.

Have you configured your 2504 properly ? If so you simply want to put your AP on same vlan as 2504 management vlan, then AP will find WLC via L3 broadcast & it will register to WLC.

Here is the 2504 Deployment guide that should helps you

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

HTH

Rasika

**** Pls rate all useful responses ****

paragkolhe2008 · ‎04-11-2015

Hello Manannalage Rasika,

First of all Thanks for your reply.

Actually We have CAP2602E-N-K9 and CAP1602I-N-K9 access points from that :

CAP2602E-N-K9 AP already configured with WLC AIR-CT2504-15-K9 and working fine as a Secure Impact using following commands:-

#capwap ap ip add _ _

#capwap ap controller _ _

#capwap default gateway_ _

Now I want to connect CAP1602I-N-K9 AP with same WLC.

I will check first version of WLC. If suppose its not above 7.0 version then what how will have to upgrade so that current working AP will not effect after upgradation.

Regds,

Parag