Disable all workstation-to-workstation communication on wireless network

[EdouardZorrilla0939]

Gents,

Is it possible to disable workstation-to-workstation communication in a wireless network using Cisco ISE ?.

I know it can be done in the wired network using dynamic ACLs.

Regards,

Edouard.

[Scott Fella]

On the controller there is a feature to disable peer to peer.

[EdouardZorrilla0939]

I have a 2500 WLC and we are about to procure a 9800 WLC. 

Let me find that feature to disable peer-to-peer on the Wireless controller.

Regards 

[Scott Fella · Accepted solution]

Here is some info that will go over the feature.
9800: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/peer-to-peer-client-support.html <>
2504: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/wlan_security.html#ID821 <>