EAP-TLS Howto?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-20-2007 04:38 AM - edited 07-03-2021 02:58 PM
Hi All,
I'm having a total nightmare trying to get EAP-TLS going in my lab.
Windows 2003 Certificate Server.
ACS Appliance running 4.1
Aironet 1231AG running 12.3(8)JEA
Windows XP Laptop
Can anyone point me in the direction of a howto? The only EAP-TLS deployment guide I can find is years old and no longer valid http://www.cisco.com/en/US/products/hw/wireless/ps430/products_white_paper09186a008009256b.shtml#wp40919
The problem I am having seems to be that the XP client is not sending the credentials to the AP when asked for them...
Please see attached Debug & AP Config.
Many Thanks,
Nick
- Labels:
-
Wireless Security
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-26-2007 09:36 AM
Enable debug aaa/eap transactions on the client and let me know the debug message it is sending during the failed authentication attempt. I will look into that error message and suggest a solution accordingly.
