I am setting up a MASH network using 1240 AP and 4402 WLC.
After setting up a rootAP I added a mashAP and put his MAC address in the local MAC filter table!
Everything was fine: mashAP joined the network, and everything was fine.
After that I wanted to do external MAC authentication using ASC 4.2
I set up the WLC in the network device group, added mash AP mac address in a user group (username eq MAC address, password eq MAC address with colon as a separator)
I defined radius servers on WLC, defined colon as a separator. I added image name MAC address as a user with same password to the same user group.
Reload the mashAP and never achieve to authenticate again.
I got Auth OK message in the passed authentications log for username c1240-c84c75a0f598 on the ACS srv and nothing else!
On my WLC I am getting: AAA Authentication Failure for UserName:c8:4c:75:a0:f5:98 User Type: WLAN USER
If put the back my mashAP MAC address in the local MAC filter table, mashAP join in minutes.
I would apriciate any help regarding setting up external MAC auth for my mashAP