08-08-2012 10:02 AM - edited 07-03-2021 10:30 PM
wlc 5508 code 7.0.220.0
AIR-CAP3502E-N-K9
ap mode: hreap
vlan mapping native 30
vlan ssid x 310.
each time that for what ever reason my access point goes down(not that my access point resets by itself, if i have to move it), the setting in the vlan mapping resets to whatever my native vlan is, in this case 30
that is native vlan 30
ssid x vlan 30
any idea.
08-08-2012 10:05 AM
Do you have multiple WLC? if you do, the WLAN's need to be in the same order. If you have HREAP Groups configured, they need to match as well.
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
08-08-2012 10:08 AM
on
just one controller just one ssid no hreap groups or ap groups
08-08-2012 10:22 AM
it could be
but it is marked Unreproduceable. You might try upgrading to the latest 7.2 code if you don't have 'legacy' AP.
HTH,
Steve
-----------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide