11-25-2016 11:14 AM - edited 07-05-2021 06:10 AM
I have made some research and I have not found if the WLC 2504 can actually provide the Multicast AP mode = Unicast. I know through the initial setup configuration that a Multicast IP Address is mandatory (required) so when I finished that and accessed the WLC using GUI, the Unicast option was not there, not even on the config>network>multicast cli option.
Any ideas?
Solved! Go to Solution.
11-25-2016 11:55 AM
It is
The 2504 supports neither the wired guest feature before Version 8.0, nor the multicast-unicast feature (only multicast-multicast)
HTH
Rasika
*** Pls rate all useful responses ***
11-25-2016 11:55 AM
It is
The 2504 supports neither the wired guest feature before Version 8.0, nor the multicast-unicast feature (only multicast-multicast)
HTH
Rasika
*** Pls rate all useful responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide